The secret to successful 3D printing almost always boils down to one thing: a perfectly leveled print bed and correct initial calibration. If your first layer fails, the entire print is bound to fail.
Top Tips for Perfect Calibration:
-
The Paper Test: For manual leveling, adjust the bed corners until a piece of standard printer paper slides under the nozzle with a slight, even resistance.
-
Z-Offset Tuning: Ensure your nozzle height is correctly calibrated so the filament squishes slightly onto the build plate without being flattened completely.
-
First Layer Speed: Always set your initial layer printing speed lower (around 20-30 mm/s) to give the plastic enough time to bond securely.
Take your time with calibration before starting long print jobs, and you’ll avoid ruined materials and frustrating failed runs!